$30.00

Model# CP8301

Microphone Impedance Matching switch from High Z To Low Z - Switchable Line Transformer Adapter with a 9” Cable, Female XLR to Male 1/4"

Metal Professional Dual Impedance Microphone Matching Transformer built into XLR female plug with a short lead to an all-metal jack plug. Impedance selector switch for low/high input. XLR, 9 in Dual Impedance Line Matching Transformer Cable - XLR Female to 1/4" Male this High/Low switch is built-in, no wiring necessary. 1/4" male phone plug switchable input between 600 ohm/50K to 600 ohm, microphone to Hi-Z Guitar Amp.

Opposite to a D.I. box. This device is used to match impedance between a mic level signal and a Hi-Z guitar level input, maximizing signal transfer for maximum volume and clarity.

There is a switch on the device to change the direction of the impedance matching, meaning the transformer can be used in the opposite direction.

Plug a Microphone into a guitar amp and you will not hear tthe mic the level will be to low. Typically it would be used to plug a microphone (low impedance device) into a guitar amplifier (high impedance / Hi-Z input). If you attempt such a connection without using such a device, the output signal from the amp will be much lower.

Products specifications:
Connector A 1/4 Male
Connector B XLR Female
Color Black
Length 9 Inch
Impedance transformer 600ohm to 50k ohms (Low-Z to Hi-Z)
XLR(f) 3 pin to 1/4" TS Jack
Maximses Power Transfer
Compatible devices Microphone
Switchable from Low Z to High Z
Permits use of long microphone cables
Maintains high frequency response
Reduces noise pickup

Please Note:
This item is around 12" in overall length, designed to attach to the end of an existing microphone cable before plugging into your amplifier or guitar pedal.
Used – Like New

Same Day Shipping - Ships from Blonds personal stash
Located in: New Orleans, Louisiana, United States

Handling Cost:
$20.00 will be added on items over 30lb
$50.00 will be added on items over 100lb
Free local pickup

Shipping: Calculate

make an offer